NCM-LJ CNC glue spraying machine

Equipment

Process

Consulting
E-MAIL

NCMCO@163.com

Product advantage

Equipment use.

Used for gluing the front and rear door panels of various steel and stainless steel doors such as anti-theft doors/fire doors/medical doors/purification doors.

成品图.png


Working principle

After stacking the main agent raw material barrel and the double curing agent large rubber barrel, they are transported to the material discharging insulation warehouse with heating function, and then the glue is stably discharged through the servo glue pump, high-sensitivity glue valve mixing pipe mixing, high-precision glue dispensing head, and servo The shaft cooperates with the assembly line to evenly and flexibly spray glue, forming a uniform and continuous layer of glue.


作业原理.png

feature of product

● CNC adjustment, the glue is mixed more evenly and glue is saved at the same time;

● Automatic glue dispensing, glue dispensing is more uniform, and it is not easy to leak glue or less glue;

● Fully automated operation, a general worker can operate it;


Technical Parameters

Technical Parameters

参考指标

Feeding plate thickness

(0.5-50) mm, customized according to customer needs

Feeding plate width

(300-1200) mm, customized according to customer needs

Feeding plate length

(500-3000) mm, customized according to customer needs

Glue head width

240mm

Production speed

(0-8)m/min

monitor rate

4.5kw

control method

PLC control system

Enter air pressure

0.4-0.8MPA


Random information

serial number

name

quantity

备注

1

Shipping list

1 serving


2

Acceptance report

1 serving


3

user's Guide

1 set


4

Electrical schematic diagram

1 set




Cooperation required from the user

1. Power supply: 380V, 50HZ, voltage fluctuation is -5% ~ +10%; when the voltage fluctuates greatly, the user must be equipped with a voltage stabilizer, otherwise the low-voltage electrical appliances will be in an abnormal working state, and the life of the electrical components will be reduced or Problems such as damage, scrapping of processed products, stoppage of work caused by motor alarm, damage to computer hard disk, etc.

2. Air source: output 0.6Mpa or above, dry and clean compressed air, air supply volume 0.3 cubic meters/minute; if the air is not dry enough, the user should be equipped with a cold dryer, otherwise water will enter the pneumatic parts and cause the piston friction resistance to change. Large, worn sealing rings lead to air leakage and other problems. Especially in winter, they are prone to freezing, leading to increased damage to pneumatic components.

3. Ambient temperature: 0°C ~ +40°C; below 0°C, parts that may contain water such as oil-water separators and gas tanks will freeze. The lubricating oil will be too viscous due to the low temperature, affecting the lubrication effect. , resulting in component damage or failure.

4. Environmental humidity: relative humidity 20~80%RH (non-condensing).

5. Stay away from strong vibration sources and electromagnetic interference; if the distance is too close, the user must be equipped with a filter, otherwise it will cause problems such as computer screen flashing, LED light flashing, driver alarms, encoder abnormalities, or interference with other nearby equipment.

6. An environment with less dust and no harmful and corrosive gases.

7. It is forbidden to cut off the power when the equipment is working, and keep the voltage stable.

Technical parameters
Consulting

If you have any questions, welcome to leave a message to us, we will reply you at the first time.

Related Products

Copyright © ncm ALL Rights Reserveds Links:Lianke